Text Box:
Text Box: Text Box: Dump Bodies
Text Box: Push Frames
Text Box: Snow Plows
Text Box: Wetting Systems

Specifications Subject to Change Without Notice.

Standard Features

Material feed gate is lever and chain operated with an opening of 10” high X 19” wide.

Char-Lynn hydraulic motor coupled to input shaft drives gearbox

Worm gear is aluminum/bronze alloy with 90,000 lbs tensile strength

8600

Hopper Spreader

Spinner and Chute is 3/16” steel 18” diameter spinner disc mounted directly on Char-Lynn hydraulic motor shaft. One-piece #10 gauge welded construction of chute, four-steel external deflectors, one fixed and three adjustable. More Info

Description: The Flink 8600 hopper spreader offers total speed control reliability in a versatile, low profile design. Adjustable chute, deflectors, feed gate and inverted “V” ensures you have full control over spreading pattern. Mounts quickly and easily.

 

Options: Sectional hinged screen group, hinged inverted vee, light group, self-locking screw gate jack, gravity chain oiler, urethane spinner disc, dump body mount group, tailgate latch, grease tubes to top or rear, adjustable height bumper group, wetting system - hydraulic or electric, 409 stainless steel, 304 stainless steel, special sizes, special color

Standard Features

Material feed gate is lever and chain operated with an opening of 10” high X 19” wide.

Cab Control equipped with toggle switch for throttle/choke, toggle switch for electric clutch on/off, key switch, and light for electric clutch.

FSDM/FSDMH

Hopper Spreader

Spinner Assembly features molded 14” urethane HD disc with four vanes, driven by hydraulic motor coupled to spinner shaft.

Material chute has two internal adjustable deflectors and four external deflectors. Optional 18” extension is available for larger trucks. More Info

Description: The Flink FSDM Hopper Spreader is a low profile medium duty spreader that mounts quickly and easily. The FSDM is ideal for trucks between 15,000GVW and 26,000GVW. Wetting system - Hydraulic or Electric is optional. Other options are available upon request.

 

Options: Heavy duty hold down group, heavy duty sloped and hinged top screen, wetting system - hydraulic or electric, 304 stainless steel, light group, special color, 11 HP Honda

Standard Features

Material feed gate is adjustable with self-locking screw jack and opening is 10” high X 19” wide.

Conveyor Drive features 2 Char-Lynn drive motors, one each end of conveyor drive, 50:1 high efficiency chain and sprocket reduction, provides higher torques and conveyor speeds.

LMC5/LMC5H

Hopper Spreader

Spinner and Chute is 3/16” steel 18” diameter spinner disc mounted directly on Char-Lynn hydraulic motor shaft. Three-piece chute constructed of #10 gauge minimum material, bolted for easy replacement. Three-steel adjustable external deflectors.

More Info

Description: LMC5 Hopper Spreader features a durable state-of-the-art welded construction. Hopper body fabricated from #10 gauge steel sides and ends - channel formed at top and continuous welded inside stem. Baffles and deflectors adjust without the use of tools. Routine maintenance areas are easily accessible.

 

Options: Sectional hinged screen group, Hinged inverted vee, light group, gravity chain oiler, urethane spinner disc, dump body mount group, chassis mount group, tailgate latch, grease tubes to top or rear, adjustable height bumper group, full-length catwalks, slope fronts, access ladder, bolt-in floor plate, 409 stainless steel, 304 stainless steel, wetting systems - Hydraulic or electric, special sizes, 18HP Kohler engine drive group, special color

Standard Features

Overall conveyor width is 6-3/4”

Material feed gate is controlled by a lever and chain arrangement, without opening engine hood.

Spinner Assembly features molded 14” urethane HD disc with four vanes, driven by #40 chain from gear box input shaft.

Material chute has two internal adjustable deflectors and four external deflectors. Optional 12” and 18” extensions are available for larger trucks. More Info

FM/FMH

Hopper Spreader

Description: The Flink FM/FHM Hopper Spreader features a completely self-contained low profile design that mounts quickly and easily on pickup, dump or platform trucks. Ideal for parking lots, shopping centers, schools, industrial plants, roads, bridges, and intersections.

 

Options: Hydraulic spinner motor, heavy duty hold down group, top screen, heavy duty sloped and hinged top screen, 6” hopper height extension (adds .7 yd.) 12” hopper height extension (adds1.3 yd.) hinged inverted vee, wetting system - hydraulic or electric, 409 stainless steel, 304 stainless steel, special sizes (additional capacity, special color, 11 HP Honda

© 2016 Flink Co. All Rights Reserved.

Text Box: Text Box: Home
Text Box: Literature
Text Box: Dealers
Text Box: Warranty
Text Box: Contact Us
Text Box: In Stock
Text Box: Products

Spreaders

Text Box: Text Box: Tailgate Spreaders
Text Box: Hopper Spreaders

Standard Features

Capacity - 6.4 cubic yards

Auger Trough - 24” wide

Auger Drive - feed auger driven by a hydraulic motor coupled to auger shaft

Spinner and Chute - 5/8” polyurethane 20” diameter spinner disc attached to a Char-Lynn hydraulic motor. Three-piece chute constructed of #10 gauge minimum material, bolted for easy replacement. Three-steel adjustable external deflectors, one fixed deflector.

LMC5HA

Auger Hopper Spreader

Description: LMC5 Hopper Spreader features a durable state-of-the-art welded construction. Hopper body fabricated from #10 gauge steel sides and ends - channel formed at top and continuous welded inside stem. Baffles and deflectors adjust without the use of tools. Routine maintenance areas are easily accessible.

 

Options: Sectional hinged screen group, Hinged inverted vee, light group, gravity chain oiler, urethane spinner disc, dump body mount group, chassis mount group, tailgate latch, grease tubes to top or rear, adjustable height bumper group, full-length catwalks, slope fronts, access ladder, bolt-in floor plate, 409 stainless steel, 304 stainless steel, wetting systems - Hydraulic or electric, special sizes, 18HP Kohler engine drive group, special color

Specifications

Weight (empty) - 780 lbs

Capacity - 2 cubic yards

Spreading Material - 50/50 Sand/Salt, 100% coarse sand, 100% bulk sand

Spreading Width - Up to 40 feet

Speed Control - Digital, self diagnosing variable speed controller.

Wiring Harness - Completely loomed automotive-style, non-combustible with molded plugs.

Auger - attached to it’s own motor/transmission.

FEPV2 

Poly “V” Spreader

Description: The patented material flow system features a heavy duty vibrator mounted to an inverted “V” inside the spreader to ensure your material gets where it needs to go. Save both money and time with a low maintenance, high value poly spreader!

Specifications

Weight (empty) - 939 lbs

Capacity - 3 cubic yards

Spreading Material - 50/50 Sand/Salt, 100% coarse sand, 100% bulk sand

Spreading Width - Up to 40 feet

Speed Control - Digital, self diagnosing variable speed controller.

Wiring Harness - Completely loomed automotive-style, non-combustible with molded plugs.

Auger - attached to it’s own motor/transmission.

FEPV2 

Poly “V” Spreader

Description: Get better control of your material usage with the FEPV3 Poly Spreader. The patented material flow system includes a heavy duty vibrator mounted to an inverted “V” inside the spreader for constant and even material flow. Mounting is made easy with the included positive locking mount, bolt-down kit and ratchet strap assist.